Platinum Member Chris Toyne Posted October 18, 2020 Platinum Member Share Posted October 18, 2020 Hi all just purchased a 2007 Grand Cherokee 3.0crd overland, I've done about 3000 untroubled but now its started to stall at any speed. Found to be caused by a faulty crank position sensor. My problem is i cant find the sensor as said above Newbie any help as to were the sensor is on the engine would be very much appreciated. Many thanks in advance Regards Chris Quote Link to comment Share on other sites More sharing options...
Platinum Member spookie the aardvark Posted October 18, 2020 Platinum Member Share Posted October 18, 2020 Hi Chris. and a warm welcome to the club, sorry I cant help you out with your crank position sensor issue but there are some very big brains on here who will be able to help you out when they see your thread Quote Link to comment Share on other sites More sharing options...
Platinum Member digger Posted October 18, 2020 Platinum Member Share Posted October 18, 2020 Hi , welcome aboard Chris. I think you have to access it through the inside wheel arch cover on the passenger side. We do have workshop manuals in the technical section under forums. Hope this helps. Quote Link to comment Share on other sites More sharing options...
Platinum Member Chris Toyne Posted October 18, 2020 Author Platinum Member Share Posted October 18, 2020 Thanks For the info digger ill have a look tomorrow. Quote Link to comment Share on other sites More sharing options...
Platinum Member Chris Toyne Posted October 25, 2020 Author Platinum Member Share Posted October 25, 2020 Thanks Digger your information was correct as too the location and access too the sensor. I would of been looking for a lot longer without the info many thanks. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.