Platinum Member V Posted June 13, 2022 Platinum Member Share Posted June 13, 2022 I need a 31.5mm diameter front sway bar (front anti-roll bar) from a pre-July 2002 WJ/WG that has BOTH left and right steel mounting straps that go over the rubber 'D' bushes. I am not bothered about the condition of the 'D' bushes as these will be replaced, but both of the steel straps must be intact and of MoT pass standard. I also need the end links and bolts/nuts/washers, particularly the tubular steel bushings that are inside the rubber bushes that the bolts pass through. If the circumference of the sway bar is 99mm (98.9mm) that's the one I need. If the circumference of the sway bar is 94mm (94.26mm) I don't need it. Quote Link to comment Share on other sites More sharing options...
Platinum Member V Posted October 12, 2022 Author Platinum Member Share Posted October 12, 2022 I've just bought one. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.